: Carefully drill 18mm holes in the front bumper at the marked positions (VLA, VLI, VRI, VRA) for the sensors [1.1].
: Replace the button unit in the center console. Use a tool to press the plastic springs to release the old unit and connect the new control cable [1.2]. 1669-set-1x.jpg
Based on community documentation from Bimmerpost , here is a high-level guide for using this kit: : Front bumper cable set (Part #61129260019) [1.3]. : Carefully drill 18mm holes in the front
For the full step-by-step walkthrough and specific wiring diagrams, you can refer to the Front Park Distance Control Retrofit DIY on the Bimmerpost forums . 1669-set-1x.jpg
PDC installation kit (Part #66202338070) including wiring harness and sensors [1.3].
: Carefully drill 18mm holes in the front bumper at the marked positions (VLA, VLI, VRI, VRA) for the sensors [1.1].
: Replace the button unit in the center console. Use a tool to press the plastic springs to release the old unit and connect the new control cable [1.2].
Based on community documentation from Bimmerpost , here is a high-level guide for using this kit: : Front bumper cable set (Part #61129260019) [1.3].
For the full step-by-step walkthrough and specific wiring diagrams, you can refer to the Front Park Distance Control Retrofit DIY on the Bimmerpost forums .
PDC installation kit (Part #66202338070) including wiring harness and sensors [1.3].
