: Ensure the model is scaled correctly for 3mm fittings if you plan to use it as a decorative zipper pull or charm. Assembly and Finishing
: Use 0.1mm to 0.16mm for high detail, especially for the facial features.
: Remove any support structures carefully with flush cutters.
: A 15-20% Grid or Gyroid infill is typically sufficient for decorative figurines.
: If using this as a leathercraft accessory, utilize an Acrylic Zipper Guide to ensure the zipper tape is perfectly aligned before gluing and stitching.
Right-click and select to reveal the .stl or .obj files intended for your 3D printer's slicer software. Slicing and Printing Parameters
Bunni.3mm3.zip -
: Ensure the model is scaled correctly for 3mm fittings if you plan to use it as a decorative zipper pull or charm. Assembly and Finishing
: Use 0.1mm to 0.16mm for high detail, especially for the facial features. bunni.3mm3.zip
: Remove any support structures carefully with flush cutters. : Ensure the model is scaled correctly for
: A 15-20% Grid or Gyroid infill is typically sufficient for decorative figurines. bunni.3mm3.zip
: If using this as a leathercraft accessory, utilize an Acrylic Zipper Guide to ensure the zipper tape is perfectly aligned before gluing and stitching.
Right-click and select to reveal the .stl or .obj files intended for your 3D printer's slicer software. Slicing and Printing Parameters