The standby light should start flashing, indicating the update is in progress. during this time.
: If the board does not detect the USB, ensure the drive is formatted correctly and has only one partition. Download T5964 1280x768 USB rar
Plug in the power cord while holding down the button on the TV or remote (process may vary; some boards update automatically upon power-up if they detect the file). The standby light should start flashing, indicating the
: If the image is distorted, ensure the firmware specifically matches the 1280x768 resolution of your LCD panel. Plug in the power cord while holding down
Caution : Using the wrong resolution or panel type can result in a "black screen" or permanent damage. : Use a high-quality USB 2.0 or 3.0 flash drive. Format the drive to FAT32 .
: If the device is connected to a PC and not recognized, check the Device Manager to update the Generic PnP Monitor or VGA driver .
Extract the .rar file and copy the .bin firmware file directly to the of the USB drive (do not put it in a folder). Perform the Installation : Turn off the TV/monitor and unplug the power cord. Insert the USB drive into the board's USB port.