The is a legacy 10/100 5-Port Ethernet Hub designed for simple, plug-and-play network expansion. Because it is an unmanaged hub, it does not have a web interface or software to configure—you simply plug it in and it works.
The hub's auto-sensing ports allow you to mix 10Mbps and 100Mbps hardware seamlessly. Linksys Network Hub Nh1005 Manual Pdf txt
Use standard Cat5e or better Ethernet cables to connect your computers, printers, or other network devices to any of the 5 ports. The is a legacy 10/100 5-Port Ethernet Hub
To connect this hub to another hub or a router, use the dedicated Uplink port (usually shared with Port 5 or labeled separately). Use standard Cat5e or better Ethernet cables to
If your model has an MDI/MDIX button, it must be depressed to use the uplink capability. LED Indicator Meanings Power Unit is powered on and ready Link/Act Port has a valid 10/100Mbps connection Link/Act Data is being transmitted or received 10/100M Port is operating at 100Mbps (Fast Ethernet) 10/100M Port is operating at 10Mbps status FDX/Col Port is in Full-duplex mode FDX/Col Collisions occurred (Port is in Half-duplex) Troubleshooting Tips
For more detailed support on older hardware, you can check the Linksys Support Home or browse manuals on community sites like ManyManuals .