Ltupps.rar -

: If your post comes in two pieces, slide the bottom 4x4 section into the top section to reach a total length of 5 feet. Secure them using the provided pre-drilled holes. 2. Install the Post

: Fill the hole with dirt or gravel, tamping it down firmly as you go to ensure stability. 3. Mount the Library

: Place your library box on top of the secured topper. LTupps.rar

: Dig a hole approximately 2 feet deep and 1 foot wide.

If you are instead trying to "post" content to the Linus Tech Tips (LTT) forum, ensure you are in the correct sub-forum (like "General Discussion") and use the "Image" icon to paste URLs if you are sharing photos of your build. How to Assemble a Little Free Library Post : If your post comes in two pieces,

Note : At this depth, a 5-foot post will stand about 3 feet above the ground, which is a standard height for accessibility.

: Center the post in the hole. Use a level to ensure the topper is even with the ground before filling. Install the Post : Fill the hole with

: Drive two screws through the pre-drilled holes on the sides and one through the topper directly into the 4x4.