Ns1326.rar May 2026

Right-click the MPTool executable and select Run as Administrator to ensure it has access to your USB ports.

Plug in your external drive. If the tool does not detect it, you may need to use a "short-circuit" method on the chip pins (only recommended for advanced users/bricked devices).

Load the correct .ini or .bin file provided in the archive before clicking "Start" to flash the firmware. NS1326.rar

The actual instruction code for the controller, often labeled with a version number (e.g., NS1326_v1.0.bin ).

The primary executable (e.g., NS1326_MPTool.exe ) used to detect the chip, format the drive, and burn firmware. Right-click the MPTool executable and select Run as

If you extract this archive, you will generally find the following components:

Specific Windows drivers required to put the device into "ISP" (In-System Programming) mode. Usage Instructions Load the correct

Flashing the wrong firmware or interrupted power during the process can permanently damage (brick) your hardware controller. Use these files only if you are certain they match your specific hardware revision.